Braze Alloys
Silver (BAg-0) Technical Information
High conductivity silver brazing filler
Key Benefits
- Wets most metals. Very ductile. Will not oxidize
- Suitable for brazing under Vacuum, Hydrogen, inert atmosphere and in air with flux
Typical Applications
- Tooling for mining
- Heavy industrial equipment
Nominal Composition:
- Silver (Ag): 99.99%
Forms Available
If the form you require is not listed contact us today|
Silver Thermal Properties |
||
|---|---|---|
|
°C |
°F |
|
|
Liquidus |
960 |
1760 |
|
Solidus |
960 |
1760 |
|
Silver Physical Properties* |
||||
|---|---|---|---|---|
|
Metric |
Imperial |
|||
|
Coefficient of Thermal Expansion (CTE) |
20.6 |
x10-6/°C for 20-500°C |
11.45 |
x10-6/°F for 68-932°F |
|
Thermal Conductivity (Calculated) |
418 |
W/(m*K) |
247 |
BTU/ft h °F |
|
Density |
10.5 |
Mg/m3 |
0.379 |
lb/in3 |
|
Yield Strength (0.2% offset) |
80 |
MPa |
12 |
x103 lb/in2 |
|
Tensile Strength |
125 |
MPa |
18 |
x103 lb/in2 |
|
Electrical Resistivity |
15.9 |
x10-9(ohm*m) |
||
|
Electrical Conductivity |
63 |
x106/(ohm*m) |
||
|
Recommended Brazing Temperatures |
980 – 1010 |
°C |
1796 – 1850 |
°F |
|
Recommended Brazing Atmospheres |
10-5 mm Hg, H2, or inert gas |
|||
* Please note that all values quoted are based on test pieces and may vary according to component design. These values are not guaranteed in any way and should only be treated as indicative values. They should be used for guidance only and for no other purpose whatsoever.