Braze Alloys
Silver-ABA® Technical Information
High-purity Active Braze Alloy of silver, copper, aluminium and titanium
Nominal Composition by Weight
- Silver (Ag): 92.75%
- Copper (Cu): 5.0%
- Aluminium (Al): 1.0%
- Titanium (Ti): 1.25%
Forms Available
Sheet Preforms
|
Silver-ABA® Thermal Properties |
||
|---|---|---|
|
°C |
°F |
|
|
Liquidus |
912 |
1637 |
|
Solidus |
860 |
1580 |
|
Silver-ABA® Physical Properties* |
||||
|---|---|---|---|---|
|
Metric |
Imperial |
|||
|
Thermal Conductivity (Calculated) |
344 |
W/(m*K) |
198.5 |
BTU/ft h °F |
|
Density |
10 |
Mg/m3 |
0.36 |
lb/in3 |
|
Yield Strength (0.2% offset) |
136 |
MPa |
19.7 |
x103 lb/in2 |
|
Tensile Strength |
282 |
MPa |
40.9 |
x103 lb/in2 |
|
Elongation (2in/50mm gage section) |
37 |
% |
||
|
Electrical Resistivity |
22 |
x10-9(ohm*m) |
||
|
Electrical Conductivity |
45 |
x106/(ohm*m) |
||
* Please note that all values quoted are based on test pieces and may vary according to component design. These values are not guaranteed in any way and should only be treated as indicative values. They should be used for guidance only and for no other purpose whatsoever.