Braze Alloys
Palnicrom™-10 Technical Information
High-purity alloy of copper, gold, nickel, palladium and manganese for vacuum brazing
Key Benefits
- Brazing of superalloys and WC
- High strength and ductility
Typical Applications
- Heat exchanger assemblies
- Aero engine compressor vanes, stators and hush kits
Nominal Composition by Weight
- Copper (Cu): 37%
- Gold (Au): 25%
- Palladium (Pd): 15%
- Manganese (Mn): 13%
- Nickel (Ni): 10%
Forms Available
If the form you require is not listed contact us todayNot the right braze alloy for your project? Use our Braze Alloy Selector to evaluate alternatives
|
Palnicrom™-10 Thermal Properties |
||
|---|---|---|
|
°C |
°F |
|
|
Liquidus |
1013 |
1855 |
|
Solidus |
970 |
1778 |
|
Palnicrom™-10 Physical Properties* |
||||
|---|---|---|---|---|
|
Metric |
Imperial |
|||
|
Thermal Conductivity (Calculated) |
12.5 |
W/(m*K) |
7.2 |
BTU/ft h °F |
|
Coefficient of Thermal Expansion (CTE) |
18.8 |
x10-6/°C for 20 -600°C |
x10-6/°F for 68-1112°F |
|
|
Density |
10.5 |
Mg/m3 |
0.38 |
lb/in3 |
|
Yield Strength (0.2% offset) |
411 |
MPa |
59.6 |
x103 lb/in2 |
|
Tensile Strength |
770 |
MPa |
111.7 |
x103 lb/in2 |
|
Elongation (2in/50mm gage section) |
31 |
% |
||
|
Electrical Resistivity |
606 |
x10-9(ohm*m) |
||
|
Electrical Conductivity |
1.65 |
x106/(ohm*m) |
||
* Please note that all values quoted are based on test pieces and may vary according to component design. These values are not guaranteed in any way and should only be treated as indicative values. They should be used for guidance only and for no other purpose whatsoever.