Braze Alloys
Icronibsi®-14 (AMS 4776, BNi-1a) Technical Information
High-purity Melt-Spun Foil alloy of nickel, chromium, silicon, boron and iron, for vacuum brazing
Key Benefits
- Consistent wetting and melting behaviour
- Structural stability over wide temperature range
Typical Applications
- Heat exchanger assemblies
- Aero engine compressor vanes, stators and hush kits
- Bonding diamond compounds to tungsten carbide cutting tools
Nominal Composition by Weight
- Nickel (Ni): 73.8%
- Chromium (Cr): 14.0%
- Silicon (Si): 4.5%
- Iron (Fe): 4.5%
- Boron (B): 3.2%
Forms Available
If the form you require is not listed contact us todayNot the right braze alloy for your project? Use our Braze Alloy Selector to evaluate alternatives
|
Icronibsi®-14 Thermal Properties |
||
|---|---|---|
|
°C |
°F |
|
|
Liquidus |
1077 |
1970 |
|
Solidus |
977 |
1790 |
|
Icronibsi®-14 Physical Properties* |
||||
|---|---|---|---|---|
|
Metric |
Imperial |
|||
|
Density |
7.44 |
Mg/m3 |
0.27 |
lb/in3 |
* Please note that all values quoted are based on test pieces and may vary according to component design. These values are not guaranteed in any way and should only be treated as indicative values. They should be used for guidance only and for no other purpose whatsoever.