Braze Alloys
50Au-50Cu Technical Information
High-purity gold and copper alloy for vacuum brazing
Key Benefits
- Suitable for brazing assemblies of copper, nickel and Kovar (Ni-Co-Fe alloy)
- Widely used for brazing ceramic components that have been moly-manganese metallised
- High-integrity brazed joint duties in critical applications
- Greater strength than 35Au-65Cu grade
Typical Applications
- Aero-engines (OEM and repair)
- Aerospace fuel-line assemblies
- Vacuum tubes
- Wave guide and Klystron assemblies
- Power supply surge arrestors
- Automotive components
Nominal Composition by Weight
- Gold (Au): 50%
- Copper (Cu): 50%
Forms Available
If the form you require is not listed contact us today|
50Au-50Cu Thermal Properties |
||
|---|---|---|
|
°C |
°F |
|
|
Liquidus |
970 |
1778 |
|
Solidus |
955 |
1751 |
|
50Au-50Cu Physical Properties* |
||||
|---|---|---|---|---|
|
Metric |
Imperial |
|||
|
Coefficient of Thermal Expansion (CTE) |
19.2 |
x10-6/°C for 20-850°C |
10.7 |
x10-6/°F for 68-1562°F |
|
Thermal Conductivity (Calculated) |
33.0 |
W/(m*K) |
19.1 |
BTU/ft h °F |
|
Density |
12.0 |
Mg/m3 |
0.434 |
lb/in3 |
|
Yield Strength (0.2% offset) |
128 |
MPa |
18.5 |
x103 lb/in2 |
|
Tensile Strength |
393 |
MPa |
57.0 |
x103 lb/in2 |
|
Elongation (2in/50mm gage section) |
37.5 |
% |
||
|
Electrical Resistivity |
237 |
x10-9(ohm*m) |
||
|
Electrical Conductivity |
4.2 |
x106/(ohm*m) |
||
|
Vapour Pressure (Calculated) |
2 |
10-9 mm Hg @ 900°C |
2 |
10-9 mm Hg @ 1652°F |
|
3 |
10-6 mm Hg @ 1000°C |
3 |
10-6 mm Hg @ 1832°F |
|
|
Recommended Brazing Temperature |
970 - 1020 |
°C |
1778 - 1868 |
°F |
|
Recommended Brazing Atmospheres |
10-5 mm Hg, H2, or inert gas |
|||
* Please note that all values quoted are based on test pieces and may vary according to component design. These values are not guaranteed in any way and should only be treated as indicative values. They should be used for guidance only and for no other purpose whatsoever.